Hygiene Station

Hand Hygiene Station PHW-F3

The PBW-23 hygiene station integrates hand disinfection, sole scrubbing and sole disinfection basin. Employee stand on sole cleaning grids and slowly move forward, 2 horizontal brushes auto humidified and scrub soles; Next, a dip tank for sole disinfection and hands disinfection will be simultaneously. Turnstile release then and allow he go to next area.

Small footprint compact design but with multi functions

●Hand Disinfection

●Work Boot Cleaning annd Disinfection

●304 Stainless Steel Durability and Quality

Features and Benefits:

1, High throughput capacity, about 5s per person.

2, Walk through type and ergonomic design.

3, Entirely stainless steel 304 finished.

4, Simultaneous sole sanitizing and hands disinfection, time saving.

5, Left and Right version available.

6, Sensor operated and automatic.

Sole Cleaning and Sanitizing

7, Automatic active by sensors, brushes rotating time settable.

8, Sensors in front pedestal for brushes auto active, sensors in rear pedestal for brushes stop rotate.

9, Food grade brushes, durable and long lasting.

10, Brushes auto humidified by water, sanitizer mixture or alternate.

11, 2 horizontal brushes for sole cleaning.

12, Sole disinfection basin auto refresh, sanitizer auto dilution and mixture ration control.

Hands Disinfection

13, Chamber with light.

14, Chamber with plastic front panel, hands protection.

15, Chamber corners are rounded, easy cleaning, sloped bottom.

16, Stainless steel nozzles are delicate designed and state-of-the-art craft, good atomization of disinfectant.

Turnstile and Access Control

17, Turnstile will be released only after hands disinfection.

18, I-CLEAN Controller with various protection such as chemical lacking, motor overload etc.

Hygiene Station PBW-24B   Hygienic entrance station for the food industry   Integration:  hand washing, hand drying, hand disinfection,  shoe & sole cleaning, brushing i-clean system: cleaning and sanitation time setting, chemical dosage adjustment, chemical concentration, chemical consumption monitoring Anti-splash: prevent spraying outside splash Sensor technology: fully automated personal hygiene process Access door Overview of PBW‑24BR Hygiene Station The PBW‑24BR Hygiene Station is a high-standard sanitation solution specifically designed for food factories and processing plants. Moreover, it combines automatic hand sanitization, boot sole cleaning, and turnstile access control, ensuring every employee follows strict hygiene protocols before entering production areas. Additionally, the PBW‑24BR meets GHP and HACCP food safety standards, helping factories maintain compliance while improving efficiency. For example, it is ideal for meat, dairy, beverage, and bakery factories where hygiene is critical.   Key Features of PBW‑24BR Hygiene Station Touchless Hand & Foot Sanitizer for PBW‑24BR Employees sanitize their hands quickly with the touchless alcohol-based foam dispenser. As a result, contamination risk is reduced and workflow efficiency improves. Furthermore, this system ensures full employee hygiene compliance, which is essential for maintaining food safety. PBW‑24BR Boot Sole Cleaning Systemx The rotating boot brush cleans footwear 360°, removing dirt and potential contaminants. For instance, it works perfectly in meat and dairy factories, ensuring all staff entering the production area meet HACCP and GHP standards. Additionally, the automated cleaning reduces the need for manual intervention. Integrated Turnstile Access Control for Hygiene Station The system grants access only after employees complete hand and boot cleaning. Therefore, factories can enforce sanitation protocols automatically. Moreover, it improves security by restricting entry to authorized personnel only. Durable Stainless Steel Construction of PBW‑24BR Constructed from stainless steel SUS304, the PBW‑24BR is waterproof, corrosion-resistant, and durable. Consequently, it withstands high-frequency factory use while remaining easy to clean and maintain. In addition, its robust design ensures long-term reliability even in harsh environments.   Technical Specifications of PBW‑24BR Hygiene Station Name Personnel Hygiene Station Model PBW-24BR Clean type Personnel Hygiene Voltage 220V/50Hz Power 2200W Safety protect Overload、Short circuit, 、Leakage protection Waterproof IP54 Water inlet 1/2″(DN15) Water Outlet OD40mm Operation mode Economic & Force Sanitizer volume 2L Dimension L1610x W995x H1555mm   How PBW‑24BR Hygiene Station Works in Food Factories Step-by-Step Hand & Sole Cleaning Process Employees step onto the boot sole cleaning platform, and the brushes remove contaminants automatically. Then, they place their hands under the touchless sanitizer dispenser, and foam is applied instantly. Finally, the turnstile unlocks, ensuring full hygiene compliance. As a result, both safety and productivity improve.   Workflow Integration in Food Processing Plants The PBW‑24BR fits seamlessly into daily factory routines, reducing downtime while maintaining strict hygiene standards. In addition, it supports high-volume production environments efficiently. Installation & Real-World Case Studies of PBW‑24BR Easy Installation Guide for PBW‑24BR The plug-and-play design allows setup in 2–3 hours. All components come pre-installed, requiring minimal technical skills. Once connected to power and water, the system operates immediately. Case Study 1 – US Meat Processing Factory PBW‑24BR Challenge: Hygiene breaches and manual monitoring. Solution: Installed 5 PBW‑24BR units across production zones. Result: Hygiene compliance increased by 80%, and contamination incidents dropped. Case Study 2 – UK Dairy Factory PBW‑24BR

The PBW-25 is an economic solution for hygienic entrance system. Guarantees optimal personnel hygiene from hand washing, hand drying, hand disinfection to sole cleaning and sole disinfection. All modules are sensor operated, easy to use and avoid cross-contamination.

●Cost-effectiveness

●Durability and Quality

●Customizability and Flexibility

●Easy Operation and Convenience

●Effectiveness of Hygiene Measures

●Easy Maintenance and Serviceability

●Compliance with Regulations and Standards

●Integration with Your Existing Infrastructure(Smart System)

The PBW-41E hygiene instation includes an automatic hand washing,drying and disinfecting unit, a footwear disinfection basin with/without drip zone. It guarantees fast and efficiently optimal personal hygiene.

The entire process only take 25s.

It is very small,so it can be used in the narrow space

Features and Benefits:

• Walk through type, sole disinfection and hands disinfection at the same time.
•  Entirely stainless steel 304 finished.
•  Sensor operated hands wash,soap,dry, disinfecting unit.
•  Sole disinfection basin auto refresh and chemical dilution ratio control.

Sole Disinfection Basin with Drip Zone

• Disinfection basin auto refresh & interval settable.
• Sanitizer dilution and mixing ratio control, supplement.
• Liquid level adjustable by move up or down stainless steel grid.

Hands Disinfection

• Simultaneously while sole disinfection.
• Chamber corners are rounded, easy cleaning, sloped bottom.
• Stainless steel nozzles are delicate designed and state-of-the-art craft, good atomization of disinfectant.

Access Control

• I-CLEAN Controller with various protection such as chemical lacking, motor overload etc.
• I-CLEAN Controller enable user set sanitizer dose and dilution percentage.
• Card reader, Face ID etc. monitoring system can be integrate into the I-CLEAN Controller.

When worker step into the dip-tank for soles disinfection, simultaneously, he can disinfect his hands. After that, the turnstile will open. The entire process only take 3~4s.

Features and Benefits:

1, High throughput capacity.

2, Walk through type, sole disinfection and hands disinfection at the same time.

3, Entirely stainless steel 304 finished.

4, Left and Right version available.

5, Sensor operated hands disinfecting unit.

6, Sole disinfection basin auto refresh and chemical dilution ratio control.

Sole Disinfection Basin with Drip Zone

7, Disinfection basin auto refresh & interval settable.

8, Sanitizer dilution and mixing ratio control, supplement.

9, Liquid level adjustable by move up or down stainless steel grid.

10, Drip off zone for water draining, avoid spilling.

Hands Disinfection

11, Simultaneously while sole disinfection.

12, Chamber with light.

13, Chamber with plastic front panel, hands protection.

14, Chamber corners are rounded, easy cleaning, sloped bottom.

15, Stainless steel nozzles are delicate designed and state-of-the-art craft, good atomization of disinfectant.

Turnstile and Access Control

16, Turnstile will be released only after hands disinfection.

17, I-CLEAN Controller with various protection such as chemical lacking, motor overload etc.

18, I-CLEAN Controller enable user set sanitizer dose and dilution percentage.

19, Card reader, Face ID etc. monitoring system can be integrate into the I-CLEAN Controller.